Canon CR-N5OO

Overview:

A dynamic PTZ camera aimed at productions and video streaming, the CR-N500 boasts a 1.0-type 4K UHD sensor and Dual Pixel CMOS AF, plus 15x optical zoom, smooth pan and tilt as well as image stabilisation to capture content in superb detail and the ability to automate your productions using Auto Tracking* and Auto Loop functions

Specifications in detail

Camera

• Image Sensor
  Type 1.0 (1.0 in.) single-plate CMOS sensor
• Effective Pixels
  approx. 8.29 megapixels (3840 x 2160)
• Lens
  f=8.3 – 124.5 mm, F/2.8 – 4.5, 15x optical zoom, 9-bladed iris diaphragm
• Optical Zoom
  15x optical zoom
• Digital Zoom
  20x digital zoom
• Focal Length
  f=8.3 – 124.5 mm, F/2.8 – 4.5,
  35mm equivalent focal length: approx. 25.5 (W) – 382.5 mm (T)
• Angle of View
  Horizontal: 73.0 (W) – 5.7° (T)
  Vertical: 45.2° (W) – 3.2° (T)
• Minimum Subject Illumination
  3840 x 2160: Approx. 1.5 lux (shutter speed 1/30 sec., Frame Rate 29.97P, Gain 33.0 dB)
  1920 x 1080: Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB)
• Shutter Speed
  1/3 – 1/2000 sec. (specific values depend on the frame frequency and frame rate)
• Iris
  Manual/Automatic aperture
• Gain
  -6.0 db ～ 33.0 db
• ND Filter
  Built-in (Off, 1/4, 1/16, 1/64), motor operated
• White Balance
  AUTO (AWB), Set A, Set B, preset settings (daylight: 5,600 K*, tungsten lamp: 3,200 K*),
  color temperature setting (2,000 K – 15,000 K), Manual
  
  * Color temperatures are given for reference purposes only.
• Focus
  Focus mode: Manual, AF-boosted MF, Continuous AF, Face AF, Tracking
  AF type: Dual Pixel CMOS AF, Contrast AF
• Gamma
  Normal1 (Standard), Normal2 (x4.0), Normal3 (BT.709), Normal4 (x5.0), Wide DR, Canon Log 3
• Pan and Tilt
  Pan operation range: Horizontal ±170°
  Pan operation speed: 0.1° – 100°/sec.
  Tilt operation range: Vertical -30° – +90°
  Tilt operation speed: 0.1° – 100°/sec.

Pan and Tilt Operation

• Protocol
  XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP), SRT, FreeD

Server

• Video Output Format: SDI
  1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
  1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
  – Same video format required for SDI and HDMI (cannot select different formats for
  SDI and HDMI)
  – When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
• Video Output Format: HDMI
  3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit)
  1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
  1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
  – Same video format required for SDI and HDMI (cannot select different formats for
  SDI and HDMI)
  – When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
• Video Output Format: IP
  3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
  1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
  1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
  640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
  – If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected.
  – A frame rate that exceeds the frame frequency cannot be selected.
  – JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected)
  Resolution: 1280 x 720
  When frame frequency is 59.94/50.00 Hz: 14.99 fps, when frame frequency is 23.98 Hz: 11.99 fps, when frame frequency is 29.97/25.00 Hz: 12.50 fps
• Video Output Format: USB
  -
• Preset
  Number of presets: Max. 100 (including home position)

Interface

• Communication Control
  LAN, Wi-Fi, Serial, IR
• Network Terminal
  LAN x 1, RJ45, 1000Base-T
• SDI OUT Terminal
  BNC jack (output only) x 1, 0.8 Vp-p/75 Ω, unbalanced
  SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant
  Embedded audio, Time code (VITC/LTC)
• GEN-LOCK Terminal
  BNC jack x 1, 1.0 Vp-p/75 Ω, input only
• HDMI OUT Terminal
  HDMI connector x 1, output only
• RS-422 Terminal
  RJ45 connector x 1
• INPUT 1/INPUT 2 Terminals
  XLR/Audio Input (3-pin jack) (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
  Sensitivity (MIC): -60 dBu (Manual volume center, full scale -18 dB)/600 Ω/Att.: 20 dB
  Sensitivity (LINE): +4 dBu (Manual volume center, full scale -18 dB)/1 kΩ or more
  Supply Voltage: 48 V DC (Bias resistance: 6.8 kΩ)
• MIC Terminal
  ϕ3.5 mm stereo mini jack (unbalanced, plug-in power supported)
  Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 kΩ or more/Att.: 20 dB
  Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 kΩ or more
  Supply Voltage: 2.4 V DC (Bias resistance: 2.2 kΩ)
• USB Terminal
  Type-A (USB 2.0) x 1 (future expansion)

Physical Features

• Operating Environment
  Temperature
  0°C – +40°C (+32°F – +104°F)
  Humidity
  10% – 90% (without condensation)
• Power Supply
  PoE: PoE+ power supply via LAN connector (IEEE802.3at compliant)
  – PoE cannot be used
  External power source: 24 V DC (using included AC adaptor)
• Power Consumption
  PoE+ Input: Approx. 19.6 W* max. (body only)
  DC Input: Approx. 18.6 W max. (body only)
  
  * Class 4 (25.5 W required) for power supply devices
• Dimensions (W x H x D)
  Approx. 200 x 269 x 208 mm (7.87 x 10.59 x 8.19 in.) (excluding protrusions)
• Weight
  Approx. 4.1 kg (9.04 lb.) (body only)

^{*Free Auto Tracking App RA-AT001(Lite) available via new FW, 1.5.0 or later. Paid license is necessary for full functionality of auto tracking}