Axial fans in line with air flow for the expulsion or introduction of air in small cultivation environments.

Designed for PVC ducting systems or flexible ducts.
Low to medium airflow movement for short distances with low air resistance.
Compatible with air ducts � 100, 125 and 150 mm.

The casing and impeller are made of durable high quality UV resistant ABS plastic.
Intellectual fan design increases fan efficiency and long service life.
Degree of protection IP X4.

Reliable and low power electric motor; designed for continuous operation and requires no maintenance.
Equipped with overheating protection.

Possibility of having two types of Control: Manual and Automatic
It can be mounted directly in the duct or on a flat surface using a special bracket
The fan is mounted in a corresponding duct size. Fixing with clamps in case of flexible duct connection.
The fans of this series have different diameters of the inlet and outlet flange to allow the fixing of the MV decorative grille to the appropriate inlet flange diameter in case of direct installation in the ventilation shaft or in place of the existing ventilation grille.

The fan can be mounted on a horizontal or vertical flat surface using a fixing bracket (model VKOk).
Two fans can be installed in series for higher performance.
For connecting the 12 V low voltage motor fan to the 220 V / 50 Hz power supply, use the separately available step-down transformer TRF 220 / 12-25


Duct diameter 100mm
Design axial
Voltage 220-240V
Frequency 50/60Hz
Power consumption 14W
Air capacity 107m�/h
Current 0.085A
RPM 2300min-1
Sound pressure level at 3 m 36dB
Weight 0.41kg
Spigot size 100mm
Engine Type 220-240V / 50-60Hz
IP Code IP X4