Yes. The 850W motor and 11,000 RPM no-load speed make this grinder capable enough for professional construction and fabrication environments, while its compact 100mm disc size and manageable 2.125 kg weight also make it practical for home workshop and DIY renovation tasks. The included auxiliary handle and adjustable guard further improve comfort and control for users of all experience levels.

Unlike entry-level grinders, this machine features double insulation for enhanced electrical safety, an auto-stop carbon brush set that protects the motor by cutting power when brushes wear out, and a spindle lock for fast, secure disc changes. These are features typically found on professional-grade tools, offering greater durability, safety, and long-term value.

This grinder ships as a complete kit. It includes the machine, auxiliary handle, wheel guard, wrench, auto-stop carbon brush set, and a guide book — everything needed to get started immediately. You will need to purchase your preferred cutting or grinding disc separately, as the appropriate disc type depends on the material you intend to work with.

This grinder accepts discs with a maximum wheel diameter of 100mm (4 inches) and uses a standard M10 spindle thread. This is a widely used size, meaning you will find a broad selection of compatible cutting discs, grinding wheels, flap discs, and wire brushes readily available from most tool and hardware suppliers.

Yes. With the appropriate diamond cutting disc (sold separately), this grinder is well-suited for cutting ceramic tiles, porcelain, and natural stone. The 11,000 RPM speed provides the surface velocity needed for clean cuts, and the adjustable wheel guard helps manage dust and debris during the cut. Always ensure the disc is rated for the material and RPM of this machine.

This grinder is rated for 220–240V AC at 50/60Hz, which is the standard mains voltage used across the UAE, UK, and most of Europe and Asia. It is supplied with a Type G (British 3-Pin) plug, making it immediately compatible with UAE and UK wall sockets without the need for an adapter.

The most likely cause is the auto-stop carbon brush set reaching the end of its service life. This is a built-in safety feature that automatically cuts power to the motor when the carbon brushes wear down to a safe minimum length, preventing motor damage. The included replacement carbon brush set can be fitted to restore operation. If the brushes appear intact, check that the power supply is stable and the disc is not jammed or overloaded.

Always ensure the grinder is switched off and unplugged before changing any disc. Press the spindle lock button to immobilize the output shaft, then use the included wrench to loosen the locking nut. Remove the old disc, fit the new one ensuring it is correctly seated against the flange, and retighten the nut securely using the wrench. Release the spindle lock and confirm the disc spins freely before reconnecting to power.

No. The adjustable wheel guard is a critical safety component and must always be fitted during operation. It shields the operator from sparks, disc fragments, and debris, and helps contain the disc in the event of a breakage. Operating an angle grinder without a guard is dangerous and is not recommended under any circumstances. Always position the guard to direct debris away from your body before starting the tool.